The TRAD Temporary Edgeguard Systems is a freestanding, counterweight temporary edge protection system. TRAD Edgeguard Temporary is the perfect system to use during the maintenance or refurbishment of flat roofs. Fast and easy to install with a minimal amount of components and tools required.
TRAD Edgeguard Temporary is suitable for all high level maintenance and re-roofing projects.
Compliant to EN13374 Class A
No mechanical fixings required
Can be used with scaffold tube
No tools required
Movable support legs allowing access to all of the edge
Cost effective solution
Durable galvanised finish
Can be installed by a competent person
Used to Cap off upright
A General Purpose Matting with a Fine Ribbed Surface, suitable as a floor covering for temporary or semi-permanent use in industrial & commercial areas. Can also be converted for Shelf or Drawer Liners in Industrial/Workshop environments.
800mm Sloping Base Unit
This is a frictional type coupler which connects two 48.3mm outside diameter scaffold Load bearing fitting which connects two 48.3mm outside diameter scaffold tubes at any angle. These fittings are particularly used for making corners or angles in TRAD Temporary Edgeguard edge protection system. EN 74 Class A, has a slip resistance 6.10kN.
This is a frictional type coupler which connects two 48.3mm outside diameter scaffold tubes end to end. EN 74 Class B, has a slip resistance 5.50kN.
Available in 3 sizes